 |
Chapter 0 (Foreword) |
|
Foreword |
|
non-fraud |
 |
Chapter 1 (bearing capacity for Shallow Foundatons) |
|
1.1 introduction |
|
1.2 bearing capacity theory |
|
1.3 use of bearing capacity relations |
|
1.4 validity of theory & failure types |
|
1.5 seismic bearing capacity |
|
1.6(A) embankment on soft soils |
|
1.6(B) improvement of embankment bed |
|
1.6(C) embankment on reinforced bed |
|
1.7 foundation on rocks |
|
1.8 safety factor of bearing capacity |
|
1.9 failure & reliability |
 |
Chapter 2 (settlement) |
|
2.1 introduction |
|
2.2 stress distribution |
|
2.3 immediate settlement & soil stiffness |
|
2.4 consolidation settlement |
|
2.5.1 uniform settlement |
|
2.5.2 shapes of diferentia settlement |
|
2.5.3 reasons of differential settlement |
|
2.5.4 encountering differential settlements |
|
2.6 allowable settlement |
|
2.7 settlement of fills |
|
2.8.1 erosion by water |
|
2.8.2 thaw or frost heave |
|
2.8.3 collapsible soil |
|
2.8.4 swelling soil |
|
2.8.5 creep of slopes |
|
2.8.6 shaking induced settlement |
|
2.8.7 other types of ground deformation |
|
2.9 reliability of settlement calculation |
 |
Chapter 3 (design of shallow foundation) |
|
3.1 introduction |
|
3.2.1 to 3.2.4 design principles of shallow foundation |
|
3.2.5 foundation rotation |
|
3.2.6 foundation drainage |
|
3.3 Isolated footing types |
|
3.4 analysis of flexible foundation |
|
3.5.1 & 3.5.2 mat bearing capacity & settlement |
|
3.5.3 mat & grid foundation types |
|
3.5.4 basement wall & mat combination |
|
3.5.5 underwater mats & footings |
|
3.5.6 complementary comments |
|
3.6 circular & ring foundations |
|
3.7 other types of shallow foundations |
 |
Chapter 4 (construction of shallow foundations) |
|
4.1 introduction |
|
4.2 slope |
|
4.3.1 to 3 desing issues & deformation |
|
4.3.4 Methods-1 wall-anchor-nail.pdf |
|
4.3.4 Methods-2 strut-truss-top-down.pdf |
|
4.3.4 Methods-3 drinage in excavations.pdf |
|
4.3.5 Conventional Method in Iran |
|
4.4 underwater excavation |
|
4.5 & 4.6 bottom instability & preparation |
 |
Chapter 5 (lateral earth presssure) |
|
5.1 introduction |
|
5.2 Lateral earth pressure |
|
5.3 conventional methods |
|
5.4 lateral pressure recognization |
|
5.5 compaction pressure |
|
5.6 seismic lateral earth pressure |
|
5.7 other subjects |
|
5.8 reliability |
 |
Chapter 6 (gravity & cantilever walls) |
|
6.1 & 6.2 introduction & design bases |
|
6.3.1 & 6.3.2 conventional & counterfront |
|
6.3.3 (a) block walls |
|
6.3.3 (b) large concrete block walls |
|
6.3.4 gabion |
|
6.3.5 CRIB wall |
|
6.3.6 bridge abutments |
|
6.4 drainage |
 |
Chapter 7 (Sheetpiles & sheeting) |
|
7.1 introduction |
|
7.2 & 7.3 sheetpiles analysis & safety factor |
|
7.4 Sheetpiles Design & Construction |
|
7.5 Diaphragm Walls |
|
7.6 Soldier Piles |
|
7.7 Flexible walls & Struts |
 |
Chapter 8 (reinforced earth walls) |
|
8.1 & 8.2 introduction & mechanism |
|
8.3 Reinforced earth walls |
|
8.4 reinforced earth wall stability |
|
8.5 Ground Anchors&Soil Nailing |
|
|
ادامه پست بعدی - برای رفتن اینجا کلیک کنید |